CREWS OF KAMAZ-MASTER TEAM HEADED FOR SILK WAY RALLY 2022

5
Июл
2022

Last Saturday, the crews of the racing team KAMAZ-master started their way to Astrakhan where the international rally Silk Way is to launch on the sixth of July.

Eduard Nikolaev and Dmitry Sotnikov will pilot new racing trucks KAMAZ-435091 of the K5 line. Andrey Karginov’s crew will drive the time-tested model KAMAZ-43509. Besides, impassability will be challenged by the crew of Sergey Kupriyanov who will perform on a KAMAZ truck fueled by gas and diesel mixture. It should be recalled that the reigning winner of the Silk Way Rally among truck racers is Dmitry Sotnikov’s crew.

The rally Dakar 2022, as well as test rides in Astrakhan Oblast and the Archeda Baja held in May gave the team many different technical ideas for implementation. There were changes in a number of characteristics of the vehicles. Each truck in the Silk Way 2022 will have to undergo its own series of tests. It is important to study and test as many engineering solutions as possible. The route from Astrakhan to Moscow will show what innovations will prove to be good and be applied in the future.

As soon as the team came home from the Dakar, they started preparing for the Silk Way. The third racing truck of the K5 line was made in the team’s production shop for the start of the Archeda Baja held in Volgograd Oblast from May 19 to 22. As part of the joint project with PJSC GAZPROM, a new gas and diesel truck was made to carry Sergey Kupriyanov’s crew. In May, the truck was tested in a racing environment.

The team is supporting imports phase-out. It continues working on long-term strategic projects. The promising activities include the manufacture of racing trucks with power units on alternatives.

Scheduled from July 6 to 16, the 10-stage route of the rally Silk Way 2022 will stretch from Astrakhan to Moscow across Russia. The racing track will tie several Russian regions. And the Republic of Dagestan and the Chechen Republic will for the first time host a rally raid competition. The route is laid on terrain of various types – from Astrakhan sands to mountainous specials of the Caucasus.

The total length of the route is 4,500 kilometers, 2,800 of which are specials. Pre-start events of the rally – administrative and technical checks – are to be held on July 6. The starting podium is planned for July 7 in Astrakhan, after the racers pass a short qualification speedy section in an urban area, on the bank of the Volga River. On the 16th of July, the winners of the race will podium in Moscow.

COMPASS VEHICLES AT INNOPROM 2022

4
Июл
2022

Within the frameworks of the International Industrial Exhibition INNOPROM 2022 that has opened in Yekaterinburg today, KAMAZ is presenting two models of the new Compass family – a refrigerator and a tow truck with a loader crane – at its stand.

At the beginning of 2022, KAMAZ introduced Compass models from the new line of medium-tonnage 4×2 trucks to the Russian market. These are delivery vehicles which are chiefly designed for operation in urban and suburban areas, but, at the same time, can be used for long haul service. The Compass chassis can hold a wide range of superstructures: various versions of vans (insulated, goods, refrigerated vans), dropside trucks with loader cranes, refuse vehicles, multilifts, tow trucks, hydraulic lifts, etc. The vehicle boasts soft ride, high visibility from the cab, and, with all that, it is quite maneuverable, with a little turning radius, which is essential for running in urban terrain and in yards crammed with vehicles.

The new project of KAMAZ started with two models: the Compass 9 with GVW of 9.5 tonnes and the Compass 12 with GVW of 11.99 tonnes. Today’s KAMAZ stand shows two representatives of the new line exactly on the Compass 9 chassis. Thus, the visitors of the company’s exposition can see a refrigerated vehicle meant for transportation of goods, which require particular temperature conditions. The body of the van is made of monolithic sandwich panels with heat transfer coefficient less than 0.4, polyurethane is used as an insulator. Inside and outside lining is cladded metal. The refrigerating unit of the chassis helps keep the temperature in the van from -20 to +6Cо. The payload of the vehicle is 3.3 tonnes, and the capacity is 12 europallets. It is important that a client can customize the van equipping the vehicle with cooling machinery, tail lifts by different producers.

The second exhibit on the Compass 9 chassis displayed at the KAMAZ stand is a tow truck featuring a straight sliding platform with a winch and a crane loader NR 811 T2S. The payload of the vehicle is 3,000 kg, the payload of the crane at the minimum crane radius of 2.5 m is 4,060 kg, the maximum radius of the loader crane is 6 m.

Both vehicles are based on the KAMAZ-43089 chassis (Compass 9) equipped with a turbocharged fuel-saving four-stroke-cycle diesel engine generating 154 hp. Its cubic capacity is 3.76 l, the fuel tank is meant for 200 l. The engine corresponds to the Euro 5 emission standard. The gearbox is mechanical, six-speed. The suspension is leaf, on two multilift springs and hydraulic shock absorbers. The refrigerator and the tow vehicle with loader crane are equipped with a wide comfortable night cab. The suspension of the cab is four-point, torsion-bar in the front, and on rubber spring elements in the rear. The driver’s comfort is ensured with an adjustable steering column, cruise control, air conditioner, power windows, steering wheel audio control.

VEHICLES FOR EMERCOM

30
Июн
2022

The experts of the Research and Development Center KAMAZ jointly with the Ministry of the Russian Federation for Civil Defence, Emergencies and Elimination of Consequences of Natural Disasters designed two latest prototypes of emergency tenders based on KAMAZ trucks of the K5 generation.

More than a dozen models of fire-fighting equipment based on KAMAZ trucks are used in emergencies to this day. But they were built on chassis of the K3 generation. At the same time, the EMERCOM requests more advanced and improved chassis meeting all requirements both of Russian and global standards.

“To make vehicles for the needs of EMERCOM is a very important activity of KAMAZ PTC. Therefore, as part of cooperation with EMERCOM, jointly with their institutions, directly with fire-fighting departments, vehicles were developed already on the K5 generation chassis. A water tender ATs-4,0-50/4 and an aerial ladder AL-42 became the first prototypes,” told Deputy Chief Designer of KAMAZ PTC for Vehicles Igor Valeev.

The water tender ATs-4,0-50/4 is built on the KAMAZ-63934 chassis with a wheel arrangement 4×2 to carry a crew of 6 people to the site of the fire. The enhanced payload of the chassis raised the volume of carried water from 3.2 cbm to 4.0 cbm. The hood hides a fuel-efficient straight six-cylinder engine compliant with Euro 5 emission standard, of 310 hp capacity, and of 6.7 l volume. The gearbox is automated, 9-speed, PTO-driven.

The new K5 day cab complies with all modern global requirements to ergonomics and comfort. It is equipped with a digital automated control system encompassing all basic systems of the fire truck. The crew’s compartment is made of steel framed fiberglass. The inner lining is made of ABS plastic panels. The highly comfortable cab is spacious, with safety and eco-friendly finishing, comfortable seats, indirect heating and careful aeration.

The fire-fighting superstructure is a weldless frame made of special aluminum profiles with glued aluminum plates. Such a rigid and rustproof construction can contain a large amount of firefighting and rescue equipment, and also easily change the equipment of the body of special and basic firefighting vehicles adapting to possible requirements alterations.

The firefighting vehicle with LED alarm lights is 8 m long, 2.55 m wide, and 3.5 m high. The GVW is 19 tonnes. The truck is equipped with up-to-date firefighting and rescue special equipment: mobile diesel generators, smoke exhaust devices, hydraulic rescue tools. To extinguish fires, there is a foam tank with a capacity of 240 l, except a water tank. The mixture is delivered at the speed of 50 liters per second. The preferred throw range is 100 m, and the maximum range is 400 m.

The aerial ladder AL-42 is also based on the 4×2 dual-axle chassis KAMAZ-63934. The key properties of this chassis is a localized in Russia fuel-saving inline 6-cylinder engine of 6.7 liters, 310 hp, compliant with Euro 5, an automated 9-speed gearbox, a hypoid axle for axial load of up to 13 tonnes.

The vehicle is 11,500 mm long, 2,500 mm wide, 3,750 mm high. The GVW equals to 22 tonnes. The enhanced payload of the chassis makes it fit for various types of firefighting high-altitude equipment.

The superstructure of the vehicle is an aluminum carcass covered with aluminum sheets without welding. The operational height of the ladder is 42 m, the angle of continuous rotation of the ladder is no less than 360°, the payload of the cradle is no less than 400 kg. The vehicle is equipped with a system of computer stabilization and other innovative solutions.

These two prototypes are currently undergoing finishing works. After field tests, the vehicles will be offered to firefighting departments of EMERCOM.