A new load-lifting system on the аssembly line

9
Мар
2020

A new load-lifting system is being launched on the аssembly line for KAMAZ cabs of the new model range.

Previously, this position was a constant congestion: the cabin was hung on a crane beam, and the assembly was started by six people who attached the necessary parts, often staying in each others’ way. The frame moved to the next position only after 30 minutes.

Technologists decided to embroider the bottleneck: instead of one position, there are three positions with two people on each, and the conveyor now moves faster. The work became easier thanks to the new load-lifting system. Immediately after the logistics team sends the forthcoming cabin to the starting position, it is “inside” a special frame of the lift. While the pickers “form” the exterior of the lower belt, the system reliably holds the load at the desired height.

A batch of grain carriers on the KAMAZ-65207 chassis was delivered to the Transmorflot LLC shipping company

5
Мар
2020

A batch of grain carriers on the KAMAZ-65207 chassis was delivered to the Transmorflot LLC shipping company.

The truck is equipped with a Daimler OM457LA (Euro-5) engine with an exhaust gas neutralization system (AdBlue), a ZF 16S2220 gearbox, and air suspension drive axles. The platform with increased rigidity has a volume of 32 m3 and is equipped with a tent frame with a winding device and a fixed platform. For a tighter fit, the platform sides have rubber seals.

The internal size of the platform, made of 09G2S steel grade — 7200x2460x1800 mm. Side locks are mechanical, open manually. The lifting device of the platform is hydraulic, driven by a pump through a power take-off box. The electropneumatic lift control is located in the cab.

A batch of grain carriers on the KAMAZ-65207 chassis was delivered to the Transmorflot LLC shipping company.

3
Мар
2020


A batch of grain carriers on the KAMAZ-65207 chassis was delivered to the Transmorflot LLC shipping company.

The truck is equipped with a Daimler OM457LA (Euro-5) engine with an exhaust gas neutralization system (AdBlue), a ZF 16S2220 gearbox, and air suspension drive axles. The platform with increased rigidity has a volume of 32 m3 and is equipped with a tent frame with a winding device and a fixed platform. For a tighter fit, the platform sides have rubber seals.

The internal size of the platform, made of 09G2S steel grade — 7200x2460x1800 mm. Side locks are mechanical, open manually. The lifting device of the platform is hydraulic, driven by a pump through a power take-off box. The electropneumatic lift control is located in the cab.