KAMAZ AT THE INTEGRATED SAFETY & SECURITY EXHIBITION 2023

5
Июн
2023

Within the framework of the XIV International Integrated Safety & Security Exhibition 2023 held last week in Kubinka, Moscow Oblast, KAMAZ PTC demonstrated a fire truck based on the KAMAZ-43265 chassis.

The Integrated Safety & Security is the largest Russian exhibition project at the federal level demonstrating the results of state policy and achievements in ensuring safety and security of the country, its population and territory. The company’s exposition presented on the territory of the Patriot Congress and Exhibition Center demonstrated the ATs-3.4-40/4 fire tank truck on the KAMAZ-43265 (4×4) chassis. The vehicle is designed to deliver an appliance crew of six people to fire sites and fire-fighting equipment providing effective extinguishing with both water and air-mechanical foam.

The all-wheel drive of the vehicle provides high cross-country ability and controllability under bad road conditions and in winter. Superstructure elements, including a fire pump, fire monitor, steps and handrails, flashing beacons, are controlled by the driver remotely – from the crew cab and pump room via the LCS. The water tank holds 3,400 liters, the foam tank contains 204 liters. The pump with a capacity of 50 l/s and a head of 100 m, the high pressure stages of the pump at a nominal rating of 4 l/s and a head of 400 m are located in the rear compartment. The vehicle operates at air temperature in the range from -40°C to +40°C.

As for the KAMAZ-43265 base chassis, its advantages are already familiar to customers. The wheel arrangement is 4×4, the engine KAMAZ 667.512 with a capacity of 285 hp complies with the Euro 5 emission standard. The cab has four doors. The gross weight of the fire truck is 15.7 tonnes.

In general, more than a dozen models of fire fighting equipment have been created on the basis of KAMAZ vehicles. They successfully perform their tasks in emergency situations, at industrial facilities and in settlements. The company continues to provide the country with the necessary equipment and expand the product line with new popular models.

SELF-DRIVING KAMAZ TRUCKS AT THE FIELDS OF EASTERN MESSOYAKHA

26
Май
2023

The first self-driving KAMAZ trucks were tested at the Vostochno-Messoyakhskoye field located on the Gyda Peninsula of the Yamalo-Nenets Autonomous Okrug.

The first digital KAMAZ trucks based on serial KAMAZ-43118 vehicles have completed pilot operation on winter roads in the Arctic. For several months, two robot trucks transported cargoes along the 140-kilometer winter road connecting the autonomous oil field with the village of Tazovsky.

A distinctive feature of these trucks is that they are allowed to go on routes in difficult weather conditions, while ordinary trucks operated by drivers are prohibited fr om it. Such extreme conditions are not a problem for unmanned vehicles: communication between trucks is carried out via industrial Wi-Fi, 3G/4G and a special microwave frequency. The trucks are equipped with several types of sensors that monitor the environment: they draw a digital road map, detect various kinds of obstacles within a radius of 200 meters, register static and moving objects.

The possibility of uninterrupted operation of self-driving vehicles during typical operations at the northern oil fields will enable their owner to significantly reduce the delivery time of goods, minimize downtime of equipment, etc. After the winter roads are closed and until the end of autumn, the unmanned trucks will continue to work at other facilities, wh ere they will also carry out ground transportation.

The development of robotic vehicles, including trucks, is one of the main trends in the automotive industry. KAMAZ started actively creating unmanned trucks and ADAS trucks back in 2017-2018. By this day, the company has accumulated extensive experience in the development of driverless trucks, combining efforts with Russian specialists, cooperating with leading universities, contributes to strengthening the technological independence of the country.

KAMAZ AT THE CTT EXPO EXHIBITION

25
Май
2023

KAMAZ is presenting a wide range of dump trucks, cranes, trailers and other vehicles at the CTT EXPO exhibition taking place at the Crocus Expo International Exhibition Center in Moscow on May 23-26.

The CTT is the largest specialized exhibition of construction equipment in Russia. The extensive business program includes round tables, a forum and other business events for representatives of companies from Russia and other countries. Every year the leader of the Russian truck production actively participates in this international event. This year, the specialists of the Sales and Service Unit and the Scientific and Technical Center have presented more than 20 models of vehicles to the guests of the exhibition: the company’s exposition presents dump trucks of the K5 new generation, concrete mixers, towed vehicles, a shift bus on the KAMAZ-43502 chassis, a high-sided truck loader crane and other vehicles in demand in the construction industry.

The KAMAZ-6595 (6×4) is the first dump truck of the new K5 line. It is designed to work on large industrial infrastructure facilities, in mountain and sand quarries. The vehicle is equipped with a KAMAZ R6 910.52-460 diesel engine with a capacity of 460 hp and a manual transmission. The load capacity of the dump truck is 25 tonnes, the permissible weight of the vehicle is 41 tonnes. The KAMAZ-6595 dump truck uses a reinforced frame and drive axles designed for an axial load of 16 tonnes.

The cab is comfortable, all-metal on a four-point suspension, without a sleeping berth. The dump truck is a heated platform made of wear-resistant steel with a volume of up to 20 cubic meters. The designers provided protection for the truck by using a massive three-section bumper made of stamped steel in front and strongback in the rear. The metal mesh will protect the headlights and radiator of the vehicle from falling stones.

The KAMAZ-65952 (6×6) dump truck designed for transportation of various bulk cargoes is a representative of the heavy line of K5 generation trucks with a gross weight of 41 tonnes. The vehicle is equipped with a KAMAZ 910.15-450 (Euro 5) engine with a capacity of 450 hp, rear drive axles with an axial load of 16 tonnes. Depending on operating conditions, it is assumed to use various versions of dump trucks with a volume of 16 to 20 cubic meters.

The KAMAZ-65955 (6×6) three–axle truck tractor is another representative of the heavy family of the K5 generation. It is equipped with a comfortable cab on a four-point suspension with one berth, while its bottom is reinforced with metal protection, which enables to overcome unpaved and rocky roads without consequences. In general, such vehicles are often used for transportation of dangerous, as well as construction goods, in coupling with dump semi–trailers, tanks, etc. The truck has a high degree of cross-country ability due to all-wheel drive: 6×6 wheel arrangement, all three axles are driving. The vehicle is equipped with a turbocharged inline diesel engine KAMAZ 910.12-450 (Euro 5). The capacity of the fuel tank is 600 liters.

According to the specialists of the Research and Development Center of KAMAZ, special attention was paid to improving the reliability of vehicles, driver comfort, and reducing fuel consumption when designing these K5 vehicles. As a result, a fundamentally new vehicle in terms of its technical characteristics and consumer properties was designed. The company launched all three of the above-mentioned models on the market in 2021.

The NEFAZ-9509-16-30 dump semi-trailer was designed specifically for use with 4×2 long-haul truck tractors. This is one of the most popular models in the construction industry. It is equipped with a 30 cubic meter platform made of 09G2S steel. Designed for transportation of various bulk construction goods (crushed stone, sand, clay sand), with the exception of rocks and cobblestones. The total weight of the model is 39 tonnes.

During the modernization, the curb weight of the semi-trailer was reduced from 9,300 to 7,600 kg. This was achieved thanks to the lightweight design of the frame and the dump truck platform of the semi-trailer. In addition, the dump truck platform received the front and rear sides beveled at an optimal angle, which made it possible to improve the weight distribution along the axes. At the same time, the oval cross–section facilitates the unloading process – bulk construction loads do not linger on the walls of the platform.

The product portfolio of KAMAZ includes a wide range of special vehicles that helps to successfully fulfill the tasks facing the construction industry. Responding to the needs of the market and the challenges of the time, the company develops and introduces new truck models into production. In addition, partners make a great contribution to the saturation of the Russian market: on the basis of the KAMAZ chassis, partner companies produce a wide range of special equipment for the regions of Russia.

Currently, KAMAZ vehicles are manufactured on a sanctions-resistant component base: automotive components of domestic production and components from friendly countries are used, which is important for the further operation of trucks and the stable operation of consumer fleets. During 2022, the company’s specialists worked on localization of imported components, a lot of work was done to find and start cooperating with alternative suppliers. Only for the KAMAZ-54901 truck, by the way, also presented at the CTT EXPO exhibition, the company’s engineers had to re-master more than two thousand items. As a result, in February 2023, serial production of the KAMAZ-54901 truck – the flagship of the K5 line – was launched on a new sanctions-resistant component base with improved technical characteristics. The release of the new version of the K5 trucks presented at the exhibition no longer depends on supplies from unfriendly countries.