TRUCK ASSEMBLY PLANT: GOALS AND TASKS FOR 2023

20
Фев
2023

The truck assembly plant summed up the results of 2022 and set goals for 2023. The plans include reengineering of aggregate production.

Speaking about the results of the team’s work in 2022, director of the truck assembly plant Anton Saraykin noted that after the events in February, which led to a change in the economic situation and reshaping of supply chains, it was necessary to actively increase the assembly of trucks of the K3 generation. The load on aggregate production has increased significantly. Despite difficult conditions, the plant finished the year with good results. “In 2022, the demand for all-wheel drive vehicles increased sharply, but the team reached record results – the production of 105 vehicle kits per day – only by December. In particular, in order to level the problems of logistics, the conveyors had to work in a 24-hour uneven mode,” the director noted. “Now there is a new task – by April we must increase the rate of assembly of all-wheel drive vehicles to 120 vehicle kits per day.”

In addition, now for the assembly of the KAMAZ-54901 truck, a part of the brackets, tubes, and other parts are being manufactured at the truck assembly plant. In the future, heavy trucks of the K5 class will be equipped with drive axles assembled at an automobile plant. According to Anton Saraykin, the Axles project has successfully passed the defense at the Industrial Development Fund, and money has been allocated for its financing.

It is planned to purchase equipment, some of it is already in the process of contracting. The processing of the cast beam, axle parts and a new axle assembly line are being prepared. The line will feature smart joint tightening control systems. This project will change the manufacturing technology for a number of parts and assemblies for K3 generation trucks. The processing of parts such as the steering knuckle housing, ball joint, axle housing, axle shaft will be transferred from worn-out automatic lines to flexible modern equipment – CNC machining centers. It is planned to organize a workshop, which will be equipped only with new equipment: in the second quarter of this year, the preparation of areas for its installation will begin.

In January, the main assembly line worked at an assembly rate of 190 vehicles per day, in February the assembly rate was higher. “In March, the figure will rise to 210, by the fall we need to accelerate to the delivery of 220 heavy trucks. The conveyors are already ready to increase the pace, the question is the timely supply of all the necessary components, including units of aggregate production,” said Anton Saraykin. “My team and me, our command center, discuss this topic daily. We have already gone through the entire chain of manufacturing axles, balancer suspension, transfer cases, singled out the production of all parts that are lagging behind this pace, developed measures to clear bottlenecks and monitor their implementation.”

As for the strategic development of the truck assembly plant, the main long-term project is Axles, its implementation is planned until 2025. “Further on, the project smoothly flows into the project of reengineering of aggregate production. The replacement of bulky automatic lines with machining centers will continue, and production areas will be optimized. The road map is scheduled until 2030,” Anton Saraykin explained.

In the future, modernization is also waiting for the assembly line for the cabs of the new model range. Now it is designed for the production capacity of 20 thousand cabs of the K5 generation. In KAMAZ’s strategy, new generation vehicles are the main point of growth, and an increase in their assembly will require an increase in capacity.

Production development is under way at KAMAZ. Under the sanctions regime, the importance of such traditional issues for the company as the modernization of production sites and import substitution has increased. By solving priority tasks in a timely manner, KAMAZ employees contribute to the achievement of a strategic goal common to all Russian enterprises – meeting demand through domestic products and strengthening the country’s technological sovereignty. The production indicators achieved to date are the result of the work of highly qualified specialists and workers who work in the interests of the security and economic stability of Russia.

THE FIRST KAMAZ TRUCK IS 47

16
Фев
2023

Exactly 47 years ago, on February 16, 1976, the first KAMAZ truck rolled off the main assembly line of the truck assembly plant.

The construction of a new plant in Naberezhnye Chelny started on December 13, 1969. The Kama auto giant was built in record time. And already on February 16, 1976, the first truck, KAMAZ-5320, rolled off the main assembly line of the truck assembly plant. Its release was timed to coincide with the XXV Congress of the CPSU. And as a sign of the successful implementation of the party’s plans, the first truck arrived on Red Square in Moscow under its own power. Test driver Valery Peretolchin was driving the truck with serial number 0000001.

The first-born of KAMAZ operated in Bashkortostan for many years, then it was bought out, restored and is now a valuable museum exhibit of the auto giant.

From 1976 to 1978, the truck assembly plant produced three basic models: a KAMAZ-5320 truck with a payload capacity of 8 tonnes, a KAMAZ-5511 construction dump truck with a payload capacity of 10 tonnes, and a KAMAZ-5410 truck tractor with a gross weight of 26 tonnes. Then a 10-tonne KAMAZ-53212 truck was developed with a wheelbase increased to 3690 mm, a 7-tonne KAMAZ-55102 agricultural dump truck, as well as a truck tractor for a 33-tonne KAMAZ-54112 road train.

At the same time, the growth rates of production at KAMAZ were record-breaking: already in June 1979, the hundred thousandth truck rolled off the main conveyor. By April 1980, 150 thousand heavy trucks had already been produced. The growth of production at KAMAZ was unprecedented for the USSR and beat world records. It is noteworthy that the first generation of trucks was in demand among consumers for many more years: models based on KAMAZ-5320 left the assembly line only in 2000.

Today, the company has already produced more than 2 million 400 thousand vehicles. The product portfolio of KAMAZ includes over 60 basic models and 1,500 vehicle configurations. At the same time, the engineers of the Scientific and Technical Center of the company do not stop at the achieved results and continue to develop innovative types of vehicles. Thus, earlier the company presented the sixth generation truck KAMAZ-54907 (Continent), the self-driving dump truck KAMAZ-6559 Jupiter 30, the hydrogen fuel cell truck KAMAZ-6290, the high-sided electric garbage truck KAMAZ-53199 Chistogor, and other high-tech novelties.

Having successfully overcome the consequences of powerful sanctions pressure, today KAMAZ, in tandem with other Russian enterprises, continues to work under the sign of strengthening the country’s technological sovereignty and industrial development. The stable production of vehicles for the needs of the country continues. For example, every effort was made, large-scale work was carried out to find alternative suppliers and localize auto components in order to restart the production of the latest generation of KAMAZ freight trucks on the new base. This is one of the strategically important projects for the country. Successful work in this and other areas confirms the high potential of the Russian automotive industry, the ability to withstand serious challenges with honor.

THE FIRST GENERAL DIRECTOR OF KAMAZ IS 98

7
Фев
2023

Today, February 7, the first general director of the auto giant, Hero of Socialist Labor Lev Borisovich Vasiliev celebrates his 98th birthday.

KAMAZ team congratulated the birthday celebrant. For many KAMAZ workers and residents of Naberezhnye Chelny, the history of the city and the auto giant is inextricably linked with the name of Lev Borisovich, a man without whom it would be impossible to implement such a large-scale and ambitious project as the construction of the largest plant in the country.

Lev Borisovich Vasiliev was born in Moscow in 1925. Fr om an early age, he was attracted to technology, but the outbreak of war prevented him from receiving an appropriate education. He fought, was seriously wounded, demobilized with the rank of senior sergeant in 1945, worked as a driver. Three years later, he came to the Moscow Small Car Factory (future AZLK), wh ere he grew from an ordinary engineer to the director of the plant. On the job, he graduated from the Moscow State Technical University.

On September 30, 1969, Lev Vasiliev arrived in Naberezhnye Chelny to take the post of the general director of the network of heavy-duty diesel truck factories under construction – what later became KAMAZ. Under his leadership, it took record time to launch a huge production line, which is now called the auto giant. At that time, it included seven modern factories, a full cycle of the production of heavy trucks: from metal melting for casting future truck parts to truck assembly. The first construction stage was completed in 1976, the second set of buildings was set to open in 1981. Over 243 thousand KAMAZ trucks were assembled in 1976-1981. All assigned tasks were completed ahead of schedule.

Half a century later, KAMAZ still remains the leader of the domestic auto industry, producing new generation trucks, creating innovative equipment – self-driving vehicles, electric buses, fuel cell buses. This became possible thanks to the unique engineering school of KAMAZ, the foundations of which were also laid by its pioneer builders.

On October 9, 2019, during a solemn ceremony, a bust of Lev Vasilyev, the first General Director of the Kama River Truck Plant, was unveiled near the General Directorate.