NEW EQUIPMENT ON THE KAMAZ ASSEMBLY LINE

29
Сен
2019

On the main assembly line of the KAMAZ automobile plant, the connection of the equipment intended for the truck assembly of the K4 and K5 generations began.

There are already five fixed torque wrenches in operation. The first to be connected to the assembly process was a “smart” wrench at the installation position of the jet rod to the frame. The worker needs to type the desired values ​​on the controller board and install the tool at the junction. If the operation is successful, the green light on the controller lights up. If the worker did not have time to complete the operation, an alarm will immediately go to the conveyor control panel and the line will stop. It is simple and convenient to work with such a tool, while vibration is eliminated.

Kamaz-master on the D915 Trabzon – Bayburt highway

24
Сен
2019

Yagiz Avji, the Five-time Turkish rally champion & Red Bull athlete and Dmitry Sotnikov at the wheel of the “KAMAZ-Master” truck, which won the last three Dakar races, known as the hardest race in the world, met face to face.

The competition on the D915 Trabzon – Bayburt highway, considered one of the most dangerous in the world, will be remembered for a long time.

Dmitry Sotnikov, the double time Dakar silver medalist: “I have participated in the most dangerous rallies in the world, but I have never before had to race on such a narrow road with so many sharp turns. This is a test that will be interesting to any pilot!”

KAMAZ-54901 HAS BEEN TESTED IN NIZHNIY NOVGOROD CITY

13
Сен
2019

A test drive of the latest KAMAZ-54901 main tractor was held in Nizhny Novgorod city.

KAMAZ continues to acquaint the regions with the first representative of the latest generation of K5 – KAMAZ-54901. Earlier, a test drive of this truck with great success was held in Moscow, St. Petersburg and Rostov-on-Don. Similar to other cities, the KAMAZ novelty aroused great interest in Nizhny Novgorod.

The potential consumers were given the opportunity to get into the driver’s seat and find themselves behind the wheel driving at the Nizhny Novgorod Autodrome (about 3 minutes were allocated for each drive-through), as well as learn all the detailed information about the car from KAMAZ specialists. Customers were interested in technical innovations that allowed the truck to become even more reliable and efficient, as well as in the terms of a special service contract.

Despite the fact that serial production of KAMAZ-54901 will start next year only, the truck is already in high demand among transport companies. Interesting to note that during the international exhibition COMTRANS-2019 the intention of customers to purchase a total of 2,300 cars in 2020 and 1,000 cars in 2021 was declared.