Technical characteristics

KAMAZ 6520 6X4 GVW 33100 KG

WEIGHTS AND LOAD CAPACITIES
Curb vehicle weight, kg
9280
Curb vehicle weight, front axle load, kg
4300
Curb vehicle weight, rear bogie load, kg
4900
Payload, kg
23820
Gross vehicle weight, kg
33100
Gross vehicle weight, front axle load, kg
7400
Gross vehicle weight, rear bogie load, kg
25700
ENGINE
Make/Model
740.51-320
Nominal power, gross, kWt (hp)
235 (320)
Maximum torque, net, Nm (kgcm) / at crankshaft rotation, rpm
1255 (125) / 1300-1500
Arrangement and number of cylinders
V-type, 8
Displacement, l
11,76
Cylinder diametre and piston stroke, mm
120/130
Compression ratio
16
Engine oil volume
11,76
FUEL SYSTEM
Fuel tank capacity, l
350
GEARBOX
Make/Model
ZF 16S
Type
Mechanical 16-speed
Control
Mechanical, remote
Front
16
Rear
2
Main Gear
6,53
WHEELS AND TYRES
Wheel type
disk, pneumatical, tubed
Tyre size
12.00 R20
ELECTRICS
Voltage, V
24
Storage batteries, V/Ah
2х12/190
Generator, V/wt
28/2000
CLUTCH
Make/Type
ZF Sachs MFZ430
Diameter
Drive
hydraulic with air-booster
CAB
Type
Above the engine with high roof
Execution
Without a berth
BRAKES
Drive
pneumatical
Drum diameter, mm
400
Brake linings width, mm
140
Brake linings total area, sq. cm
7200
GENERAL DATA
Maximum speed, not less, km/h
80
Maximum gradient, not less, %
25
Outer turning radius, m
9.3
Average fuel consumption - on road at speed 60 km/h
Average fuel consumption - on road at speed 80 km/h
Max. Fuel distance
at fuel tanks capacity

The truck tractor for difficult operating conditions KamAZ-65206 is a modern truck tractor with a 6x4 wheel arrangement, developed in collaboration with the Daimler company. This car is intended for transportation of goods as part of a road train weighing up to 44 tons. Based on the reliable and proven Mercedes-Benz Axor heavy truck, with the participation of specialists from Germany and with the wide involvement of imported components and assemblies, this tractor was launched into serial production in 2013 that meets Russian road and climatic operating conditions.

The three-axle truck tractor is built on the Daimler component base and is, in fact, the “older brother” of another modern KamAZ long-range truck - the KamAZ-5490 two-axle tractor. Especially for the production of KamAZ-65206, a separate conveyor was built by the Chelny enterprise. This model of a truck tractor has another factory designation, according to the new KamAZ classification of production indices: T2642, where the first two digits indicate the total mass of the car, and the next two digits indicate the power of its engine.

Contact Us